Color Kinetics ColorBlaze 48
The ColorBlaze 48 fixture washes large areas with far-reaching, rich, saturated colors and color- changing lighting effects. The streamlined, four-foot black metal housing provides a simple yet powerful solution for large-area scenery and wash lighting for theaters, TV and video studios, concerts, events, casinos, and exhibits. On-board power supplies and addressing capabilities eliminate the need for dedi- cated support equipment and simplifies specification and installation. The auto-switching power supplies work around the world.
Designed in a rugged extruded aluminum housing, each fixture features attached mounting brackets with two, 1/2-inch (13 mm) mounting holes for use with Cheeseborough clamps or pipe clamps. Locking knobs located on the mounting brackets allow for 180° rotational adjustment and locking with- out the use of special tools. Optional mounting brackets are available for T-handle mount applications. The housing is equipped to support spread lenses, louvers, and other attachments. A single 3-wire, 18AWG 6-foot (1.8 m) UL/cUL rated cord with IEC and flying leads is supplied. (Consult distribution for cord sets listed for PSE or CE).
Each ColorBlaze 48 fixture has eight individual circuit board assemblies, each with 18 high-intensity LEDs. This makes it sequentially controllable in 6-inch increments by a Color Kinetics DMX controller or a third-party DMX512 controller. Each circuit board is pre-addressed for Light# 1-8/DMX# 1-24. Data can be daisy-chained from fixture to fixture with an RJ-45 data cable or an XLR-5 data cable.
For protection from overheating, ColorBlaze 48 has been designed with a temperature monitoring feature. If operating temperatures rise to an unsafe level, a compensation circuit is triggered and ColorBlaze 48 operation is interrupted causing the lights to turn dull red. After 30 minutes the lights will auto-cycle and return to full intensity.
COLOR RANGE: 16.7 million (24 bit) additive RGB colors; continuously variable intensity output range
SOURCE: High intensity power light emitting diodes (LEDs)BEAM ANGLE: 10°
HOUSING: Extruded aluminum with black finishPOWER CONNECTOR: IEC 15A (max) with C13 plug, UL/cUL rated 2-pole, 3-wire, grounded, 15A, flying leads
DATA: RJ-45 or XLR-5
CONNECTORS LISTINGS: UL/cUL, CE, PSE
DATA INTERFACE: DMX512CONTROL: Color Kinetics’ line of DMX controllers or other DMX512 (RS-485) controllers
POWER REQUIREMENT 100-240VACPOWER CONSUMPTION 280W, 2.5A nominal at full intensity (full RGB)